The small groundnut harvesting machine has a compact structure and is easy to adjust. If there is a failure such as fruit loss during use, only simple adjustment is required and it can be restored to normal. Now, let's take a look at the troubleshooting of several common faults.
The body is unstable during operation: If the machine feels vibration when the groundnut harvesting machine is operating, it may be that the excavator blades on the two sides of the harvester have inconsistent swings. Machine vibration can also occur if the shovel hits the rear baffle. At this time, we only need to adjust the swing of the shovel on both sides to solve the problem of machine vibration.
The swing of the shovel can be adjusted by adjusting the length of the connecting rod. The connecting rod in front of the V-belt is responsible for the adjustment of the left digging shovel, and the connecting rod in the middle of the two vertical shafts is responsible for adjusting the right digging shovel. Lift the harvester off the ground and let the tractor run at a high speed, loosen the connecting rod lock nut, adjust the corresponding connecting rod, pay attention to observe the swing amplitude of the digging shovel on both sides, and it is advisable to delete the strips on both sides without touching the protective plate until Adjust to the same swing, then lock the nut.
Peanut soil removal is not good: Peanut soil removal is not good, which means that the soil on the harvested peanuts is not shaken. When the groundnut harvesting machine works normally, the soil on the peanuts is shaken, and most of them have been scattered in the soil, reducing artificial soil shake. Labor intensity, so when the soil removal is not good, we need to adjust in time.
The reason why the peanut is not well soiled is because the digging shovel is too deep and the swing strength is reduced. The length of the central tie rod can be adjusted to increase the depth of the digging shovel. Properly shorten the length of the central tie rod so that the rear end of the strip is 3 to 5 cm away from the ground, which solves the problem of poor soil removal.
Many fruits are dropped: Peanuts are the treasures of our farmers' friends. Peanuts fall on the ground. We have to pick them up one by one, so if you find that the harvester digs out the peanuts, you will have to drop them. Timely adjustments.
The reason for falling fruit is that the digging is too high. It can also be adjusted by adjusting the central rod. Contrary to the poor adjustment method, the length of the central rod can be extended to solve the problem. The problem.
