The maintenance of a small peanut harvester is an important task. Careful maintenance can increase the utilization rate of the machine and extend the life of the machine. The maintenance of small peanut harvester mainly includes the following aspects.
Inspection and maintenance after shift work: After each shift is completed, return to the home, first remove the dirt on the harvester components to prevent the machine from rusting, then open the hood and carefully remove the weeds around each component.
After using the peanut harvester for a week, grease the universal joints and bearings, and check and supplement other lubrication points.
Check the belt of the peanut harvester for wear. If the belt of the harvester is severely worn, replace it with a new one in a timely manner.
Peanut soil removal is not good: Peanut soil removal is not good, which means that the soil on the harvested peanuts is not shaken. When the peanut harvester works normally, the soil on the peanuts is shaken, and most of them have been scattered in the soil, reducing artificial soil shake. Labor intensity, so when the soil removal is not good, we need to adjust in time.
The reason why the peanut is not well soiled is because the digging shovel is too deep and the swing strength is reduced. The length of the central tie rod can be adjusted to increase the depth of the digging shovel. Properly shorten the length of the central tie rod so that the rear end of the strip is 3 to 5 cm away from the ground, which solves the problem of poor soil removal.
Inspection and maintenance after each season of operation: After the completion of each season of operation, not only must the machine be cleaned up, but the triangle belt must also be relaxed.
After checking and replacing the bearing of each running part, add more butter.
When storing, choose a place that is ventilated and shaded, and pad the rack with bricks or other items to keep the excavator and depth-limiting wheel off the ground. Finally, cover the peanut harvester with plastic cloth.
