Taizy Machinery explains the installation and commissioning of the nursery seeding machine and the operation process. The emergence of the nursery seeding machine has greatly liberated labor productivity and greatly improved our convenience. The nursery seeding machine is easy to operate. The following is the factory's explanation of the installation and operation of the nursery seeding machine.
1. Install the seed suction plate, remove the baffle, remove the head, and install the seeding plate (all screws are screwed on) to ensure a smooth installation.
2. Connect the 220v power supply, switch on, and hear the working sound of the fan.
3. Find matching needles based on different seeds.
ASelect several kinds of suction heads (needle tips) and insert them into the suction plate (8-10)
B take a small amount of clean and impurity-free seeds (if there are many impurities and the purity is not high, it is easy to block the suction head), test whether it can be sucked, put a small amount of seeds into a small container, turn on the machine switch, the fan works, and test the matching Needle.
C Each seed suction head is guaranteed to suck one seed. If it doesn't, it means the needle is small. If it sucks a few, it means the needle is big.
D Test the needle to find a matching seed (needle).
F After finding a suitable seed head, according to the number of needles on the seeding plate, fork all the seeding heads (the baffle can be removed and removed from the machine head, and the baffle can be installed after completion.
4. Put an appropriate amount of seeds in the seed tray (if the seeds are large or the amount is large, you can directly place the seeds in the seed tray for seeding, such as soybeans, peas, corn, watermelon, etc.). Put the matching tray in the seed tray, or put in the precision suction hole. Put seeds in the plug tray (or precision suction hole) to get seeds, so that the seeds are more concentrated during suction, which is easier to suck.
5, flowers and other small, less seeds, combined with precision suction seed suction.
6. Put a rubber sleeve on each seeding head (piercing with a needle) to expose the needle. The role of the rubber sleeve prevents the needle from clogging when the substrate is inserted and the seeds run away. Play the role of pressure point. After pressing the hole, after taking the seeds in the seed tray, adjust the seeding depth screw to allow the seeds to fall in the hole for pressing the hole. Do not insert the matrix to avoid clogging the needle.
7. Place the seed tray in place, lean against the baffle (close the baffle on the outside of the machine), and press the machine head to suck seeds.
8. Move the machine head to the left and place it over the well-filled tray, and then press the handle down.
9. The air vent is opened and deflated. The seeds are inserted into the matrix or dropped into the pressed hole to complete the sowing.
10. Repeat the above actions to complete production.
11. Spread an appropriate amount of soil in the planted tray (after pressing the hole). If the seed inserted into the substrate is not pressed, sprinkle the water.
The above points are what the manufacturer explained to you about the operation process of the nursery seeding machine. Is it convenient for everyone? When we use it, we can carry out the test operation according to the above methods. If you want to know more information, please log in to the official website for inquiries!
