Corn planter refers to the planting machinery that takes the crop corn seeds as the object (also taking into account soybeans and other crops). The planter is often referred to by the name of the crop type, such as corn planter, grain drill, corn hole drill, cotton Seeder, forage spreader, etc.
How to use: The corn seeder has the characteristics of uniform seeding, consistent depth, stable line spacing, good soil coverage, saving seeds, and high work efficiency. The following 10 points should be mastered when using the planter correctly:
1 Maintenance before entering the field should clean up the sundries in the seed box and the weeds and soil on the opener to ensure good condition, and lubricate the transmission and rotating parts of the tractor and seeder according to the instructions Oil, especially pay attention to the lubrication and tension of the drive chain and the tightening of the bolts on the planter before each operation.
2 The rack cannot be tilted After the seeder is connected to the tractor, it must not be tilted, and the rack should be horizontal before and after work.
3 Do a variety of adjustments According to the instructions in the instruction manual and agronomic requirements, adjust the seeding amount, the row distance of the ditcher, and the depth of the ditching soil-covered compression wheel.
4 Pay attention to the seeds added to the seed box to ensure that the seeds are effective. Second, the seed box should be added at least to cover the entrance of the seed box to ensure smooth seeding. .
5 Trial sowing In order to ensure the quality of seeding, before conducting large-area sowing, we must insist on trial sowing 20 meters and observe the working condition of the seeder. Ask agricultural technicians, local farmers, etc. for testing and consultation to confirm that they meet local agronomic requirements, and then carry out large-scale sowing.
6 Pay attention to the straight-line driving of agricultural machinery. The operator should choose the working walking route. It should ensure that the seeding and machinery are easy to enter and exit. When sowing, pay attention to moving straight at a uniform speed. If it is blocked, the planter should be operated while it is moving, and the planter should be lifted when going backwards or turning.
7 Sowing the land first Sowing the land horizontally first, so as not to harden the land, causing the depth of the planting to be too shallow.
8 Frequent observation When seeding, observe the working condition of the seeder, opener, cover and transmission mechanism frequently, such as blockage, clay, weeding, and poor seed covering, and remove it in time. Adjustments, repairs, lubrication or cleaning of weeds must be done after stopping.
9 Protecting the machine parts When the planter is in operation, it is strictly forbidden to reverse or make sharp turns. The planter should be lifted or lowered slowly to avoid damage to the machine parts.
10 Pay attention to the seed box. The seeds in the seed box must not be less than 1/5 of the volume of the seed box during operation. When transporting or transferring the plot, the seed box must not contain seeds, let alone other heavy objects.
