The corn peeling and threshing combined machine produced by our company includes upper and lower peeling and threshing combined machines and left and right combined peeling and threshing machines. The product has a compact structure and a small body. It adopts a unique design concept. The peeling and threshing are clean and need not be cleaned. High production efficiency, welcome new and old customers to buy.
Working principle of integrated corn peeling and threshing machine
When the corn thresher is working, the corn is fed from the feed port, the corn is hit by the rotor and the drum rotating at a high speed, the grain is separated by the screen hole, the corn cob is discharged from the tail of the machine, the corn silk and the skin are from the tuyere discharge. The feed inlet is located at the upper part of the upper cover of the machine. The corn cob enters the threshing chamber through the feed inlet. In the threshing chamber, the high-speed rotating rotor hits the corn kernels and falls off. The corn kernels are separated through the screen hole. Corn kernels splash hurt.
The raw materials enter the drum chamber through the feed port, and the drum body peels off the corn hull through rotation, friction, squeezing and pushing, and the corn hull and corn cob are automatically discharged from their respective outlets. With this machine, the threshing efficiency is determined by the length and diameter of the drum. Users can choose this series of corn threshers reasonably according to their threshing efficiency. The hammer and spacer on the rotor are wearing parts, and their wear should be checked frequently. If necessary, they should be repaired or replaced to ensure the balance of the rotor; the screen is a wearing part. If the screen is damaged, please replace it with a new one .
