Corn threshers can be divided into rotten core corn threshers and non-rotten core corn threshers according to their functions. Among them, non-rotten core corn threshers rank first among similar products with the characteristics of unbroken corn cobs.
Corn threshers can be divided into single ear corn threshers, vertical corn threshers, hammer-throw corn threshers, fully automatic corn threshers, semi-automatic corn threshers, large-scale combined corn harvesters and so on.
Corn thresher, the main working part is the rotor installed on the machine, threshing through the high-speed rotation of the rotor and the impact of the drum to thresh, is currently widely used economic threshing equipment, with small size, light weight, easy installation, operation, maintenance, Many advantages such as high production efficiency. The corn thresher is mainly composed of 5 parts: the screen cover (ie drum), rotor assembly, feeding device, frame, etc. The screen and the upper cover rotor assembly together form the threshing chamber. The rotor assembly is the main working part The threshing of corn is done in the threshing room.
When the corn thresher is working, the corn is fed from the feed inlet, the corn is hit by the rotor and drum rotating at high speed, the grains are separated by the sieve, the corn cob is discharged from the tail of the machine, and the corn silk and the skin are discharged from the tuyere. The feed inlet is located in the upper part of the upper cover of the machine. The corn cob enters the threshing chamber through the feed inlet. In the threshing chamber, the high-speed rotating rotor hits the corn kernels and falls off. The corn kernels are separated through the screen hole. Corn kernels splash hurt.
In this machine, the threshing efficiency is determined by the length and diameter of the drum. Users can choose this series of corn threshers reasonably according to their threshing efficiency. The nail teeth on the rotor are wearing parts, and their wear should be checked frequently. When the nail teeth are worn by a quarter, they can be repaired or replaced with new ones. For example, when the new nail teeth are repaired or replaced, they must all be repaired or replaced. In order to ensure the balance of the rotor; the screen is a wearing part. If the screen is damaged, please replace it with a new one.
