Advantages and disadvantages Horizontal Milling Machine

Horizontal Milling Machine advantages

1. Smooth running. Radial force bearing only a small unbalanced force generated by the torque bearing and machine stress. White less demanding grinding rollers mounted horizontally manufacturing, assembly; corresponding structural components of the general technical requirements;

2. The volume and weight of the unit output are small. Due to the axial urging force is large, the flow rate larger grain, and at the same vertical rice mill material flow into the machine, the roll diameter and milled white milled white area of the annular chamber are small, smaller machine size and weight lighter, lower binding manufacturing technology requirements, less cost;

3. It is convenient to disassemble the sand roller in the horizontal direction of the rice mill, saving time and effort;

4. The rice production rate is high, and the spiral groove makes the density of the rice grain fluid uniform over the entire length of the white milling chamber, the rolling motion is good, and the parts on the rice grain are evenly milled;

5. It is convenient and reasonable to combine the two white rollers coaxially or in different axes in a rice mill.

Horizontal Milling Machine shortcomings

1. Gravity affects the centrifugal acceleration of rice grains, which causes a difference between the upper and lower parts of the whitening room, and affects the uniformity of the whitening degree;

2. The number of rice knives is small, the material is hard, and some are not easy to adjust. For example, the fixed rice knives in the middle and lower parts need to be stopped and adjusted. Although the steel rice knives are wear-resistant, they are easy to damage the rice grains and increase the rice breaking rate.

3. Bran easily accumulates in the upper part of the whitening room;

4. Spiral grooves need to be manually repaired after being worn. The quality of the repair varies from person to person. The grinding rollers are assembled in $ 35 sections. After abrasion, they cannot be interchanged or partially exchanged. The maintenance cost is high.

Website：https://www.agriculture-machine.com/rice-mill/ 

Email:allenshuliyguo@gmail.com